Cold Spark Blitzz FX Machine, also known as a cold spark effect or cold sparkler fountains, is safe to use, spark machine that emits a cold to the touch fountain of sparks, which are not subject to catching fire. This device does not feature any pyrotechnics, but instead offers a safe, simulated pyrotechnic experience.
One of the main reasons we chose the Blitzz FX as our main Cold Spark Machine is that ProX ( an American Company based in NJ), stands behind their product 100% and has offered responsive customer service since the purchase of these units. By choosing the ProX Blitzz FX, we were guaranteed the latest in cold spark technology, high safety standards, and value.
We wanted a compact size and weight, without compromising the build quality, safety, & volume of the sparkler show. These units are a smaller version of the original Blitzz machines and the sleek design is self-contained inside a small black metal box. These have a longer run time (90 seconds) than most units currently on the market (30 - 60 seconds). They produce very little to no smoke and produce no odor, which is almost unheard amongst the Cold Sparkler industry. The granules used in these machines have no explosive content. It is also self-cleaning, so there is no mess afterward. This machine is fully programmable and easy to set up., you have the ability to control the height and duration of the sparkler display.
We needed a unit that was safe and effective indoors and outdoors. The Cold Spark Machine is a non pyrotechnic effect - it does use combustable material, it does not catch or create fire. The effect reaches a temperature of 62.5º F and just incase of an emergency, these units include a precautionary safety shutoff feature. The Cold Spark Machine fountain system allows for safe creation of the stunning desired sparks effects.
The ProX Composite Ti Stage Effect powder is a proprietary combination of Titanium and Zirconium. It contains no combustive content. The material produces a Cold Spark Effect at approximately 62 (sixty-two) degrees Fahrenheit (16.7 degrees Celsius) The product is designed for use ONLY in the ProX Cold Spark Machine and must be used as directed in the equipment instruction manual.
The ProX Blitzz FX machine works by heating up small grains of a proprietary mixture of metals, which are loaded into the machine from small pre-measured pouches. Every 7 ounces (200-gram) packet gives the operator approximately 10 to 15 minutes of firing time, in 90-second increments with a cooldown time, which means no reloading the device after a single shot. These grains produce cool-to-the-touch sparks, and there is no possibility of igniting a fire as it does not use flames or gunpowder. The effect also produces virtually no smoke, and leaves no foul odor in the air, making this a great effect for indoor use.
Power Supply Requirement
POWER REQUIREDMENTS ARE 115VAC 6 AMPS EACH. PLEASE NOTE: ONE STANDARD 15 AMP CIRCUIT SHOULD SUPPORT A MAXIMUM OF 3 PROX BLITZ MACHINES IN NORMAL OPERATIONS. EACH MACHINE CAN BE CONNECTED INDIVIDUALLY OR DAISY CHAINED WITH POWER-CON SERIES CABLES FOR UP TO 3 MACHINES MAXIMUM ON ONE CIRCUIT.
Price includes a safety trained technician, rental, delivery setup, Cold spark material, and breakdown. You’ll have the opportunity to take private photos with sparkler fountains with your photographer (pending timeline restrictions) and one “event”. Additional events are available at additional fees. An “event” could be a first look, ceremony recessional, introduction, first dance, or grand exit. Up to one continuous minute of effect is included with the rental.
Permitting cost by local fire code may be required at additional fees.
Minimum rental of 2 units required.